AOR AR5001D Spécifications télécharger pdf (Page 83)

11-4-4 CW PITCH

Comfortable listening to CW is usually centered around a tone of 700 Hz to 800 Hz. However, the center

frequency may be changed according to personal preferences. The selectable range is between

300 Hz ~ 1100 Hz in 50 Hz step. Note this function is available only in CW mode.

To select the CW pitch frequency, perform the following steps:

1. Press the [FUNC] key, and then press the [MODE] key.

2. Press the [DOWN] key three times to select “CW.PITCH” in reverse format.

3. Rotate the sub dial to select the desired CW pitch frequency.

4. Press the [MHz] key to accept the entry and return to a standard display.

Alternatively, press the [CLR] key to abort entry.

11-5 CLOCK

The AR5001D is equipped with two independent real time clocks capable of either 12 H/ 24 H format

displaying hours, minutes, and seconds. Each clock can also display a three character text comment

for identification.

When the AR5001D is switched off, but power is still connected, the clock is displayed on the LCD

without back illumination.

11-5-1 INITIAL SET

To access the clock set menu, perform the following steps:

11-5-1-1 CLOCK 1

1. Press the [FUNC] key, and then press and hold the [7] key for two seconds.

2. Rotate the sub dial to select either 12H or 24H. This selection affects both clocks.

3. Press the [DOWN] key to select “CLOCK” in reverse format.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 94 95

Pas de commentaire

AOR AR5001D Spécifications Page 83