AOR AR5001D Spécifications télécharger pdf (Page 45)

i) Rotate the sub dial to select “B”.

j) Press the [DOWN] key.

k) Press the [2] key. (“A” appears.)

l) Press the [DOWN] key.

m) Press the [3] key.

n) Rotate the sub dial to select “N”.

o) Press the [DOWN] key.

p) Press the [2] key.

q) Rotate the sub key to select “D”.

7. Press the [MHz] key to confirm entry.

A maximum of 12 characters may be added to each memory channel.

6-3 MEMORY READ

Once frequency and mode data have been stored into a memory location, retrieval is quick and simple.

Let’s assume that you are going to retrieve the frequency of 123.500 MHz which has been programmed

into memory “0325” during an earlier example in the preceding section of this manual.

1. In VFO mode, press the [SCAN] key to go into memory read mode.

2. Rotate the sub dial to select the memory bank “03” displayed on the right bottom of the LCD.

3. Rotate the main dial to select the memory channel “25” displayed on the right bottom of the LCD.

4. The memory frequency of 123.500 MHz will be displayed on the LCD.

5. If you already know the memory bank and memory channel, simply press the [0],[3],[2],[5] key.

6. The AR5001D will monitor whatever memory channel you enter into memory read.

7. To return to VFO mode, press the [VFO] key.

6-4 DELETE MEMORY CHANNEL

To delete the contents of a single memory channel, perform the following steps.

1. In memory read mode, press the [FUNC] key, and then press the [. (decimal)] key.

2. The memory delete menu will appear and blink.

3. If you wish to delete this memory channel contents, press the [MHz] key.

4. To cancel, press the [CLR] key.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 94 95

Pas de commentaire

AOR AR5001D Spécifications Page 45