® AR-STV WIRELESS CAMERA DETECTOR Operating manual AOR, LTD.
(1) 1G 2G 3G (Hz) The horizontal axis displays the receive frequency. The AR-STV can receive between 900 MHz and 2800 MHz. (1G indicates 1 GHz in f
Icon legend: Signal level Battery level SD card inside Search mode Search bank Receive freq. 5-
1. On the Search Mode screen, press and hold the MODE switch for 3 seconds 2. The following search bank setting screen will appear. Search: Sear
Step: Select the search frequency step. (Entry range: 2 ~ 10 MHz) To change the parameter, perform the same procedures as the start frequency e
Icon legend: Signal level Battery level SD card inside Search mode Search bank Receive freq. 5-2-2-
To return to the search mode, press the MODE switch and REC switch simultaneously three times. (The operation mode will toggle between the Searc
5-2-3-2 Setting 2 screen Press the MODE switch and REC switch simultaneously several times (depending on the current operation mode) until the SET
OFF: Detected image will NOT be saved on the SD memory card automatically. NTSC/PAL: Video detector mode (Parameter: NTSC/ PAL) Select
6 Specifications Frequency Coverage: 900 ~ 2,800 MHz continuous Receive Mode: FM Video Receiving system: Single conversion super heterodyn
7 LIMITED WARRANTY (for U.S.A only) AOR USA, Inc. (AOR) warrants its products as described below. AOR will repair or exchange equipment as a resu
Manufacturer: AOR, LTD. 2-6-4, Misuji, Taito-Ku,
TABLE OF CONTENTS 1 Introduction -------------------------------------------------------------------------------------- 2 1-1 Maintaining th
1 Introduction Thank you for purchasing the AR-STV Wireless Camera Detector. The AR-STV is a wireless camera receiver with a 2.5 inch color LCD disp
1-3 Supplied accessories The following accessories are provided in the shipping box. Instruction manual (this booklet) Flexible rubber a
Left View Right View Right Side of the AR-STV 1 Power ON/OFF switch 2 CONT (USB connector) 3 V
4 DC 6V (External power input connector) 5 SD (SD, SDHC memory card slot) 6 ALM OUT (Alarm output connector)
Left Side of the AR-STV 7 MODE (Mode selector) switch 8 REC (Record) switch 9 FREQ UP DOWN (Frequency selector switch)
3 Connections Connect the supplied flexible rubber antenna to the SMA antenna connector on the top of the AR-STV. If required, an external anten
Commentaires sur ces manuels