AOR AR2700 Manuel d'utilisateur télécharger pdf (Page 39)

AUDIO LOG

Audio log is a simple to use utility that provides wave audio recording and playback on your

PC using a sound card (not included). You can operate the audio log manually using the push buttons

on the tool bar or automatically from PC-MANAGER during searches and scans.

SETTING UP

The Audio Log application needs no setting up, but you will need to install a Windows

com-

patible sound card, such as one of the Sound Blaster

cards (not supplied). Follow the installation

instructions that come with your sound card before attempting to use Audio Log. If you have test

software, use that after installation to ensure that your sound card is working properly.

Some adjustment of the audio levels may be necessary for best results. There is usually an audio

mixer utility supplied with your sound card which can be used to adjust the levels correctly. If you are

using Windows

95, you can use the Volume Control utility to make alterations to sound levels by

double-clicking on the symbol in the bottom right hand corner of the Windows

95 desktop.

To connect your radio to the sound card, you need a screened coaxial audio cable with a 3.5mm

mono jack on one end and a suitable connector for the “Line In” socket on your sound card. It may be

necessary to adjust the volume level on the radio to prevent clipping or an excessively low audio level

before proceeding.

Audio Log has the following appearance:

AOR

PC-MANAGER for

Windows

- USER MANUAL - 38

AUDIO LOG

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

AOR AR2700 Manuel d'utilisateur Page 39